Bathroom Heater Light

Yuba light switch wiring method:

There are three power supply lines for the bathroom heater switch wiring:

1. The ground wire, the yellow and green one, is above the bathroom on the socket, and is connected to the shell of the Yuba. The neutral line, in most cases blue or black, is on the left side of the socket on the bottom of the bathroom, and is connected to the screw ports of the five lamp heads. The live wire, red in most cases, is on the bottom right of the socket and connects to one of the three switches.

[How to change the bathroom light and heater integrated light]

1. First of all, you need to prepare a wire stripper, a Phillips screwdriver, a flat-head screwdriver and other disassembly tools. In addition, you also need to prepare materials such as wires, LED light boards and drivers. Before the official replacement, you must remember to turn off the electric switch in your home.

2. The second is to remove the lampshade first, and then check the situation inside. Generally speaking, there will be two lamp positions inside, but we only need to use one of them.

3. Then use a screwdriver to unscrew the fixing screws of the reflector. At this time, you only need to remove the screw on one of the reflectors.

4. Next, you need to remove the lamp connector at the other end of the reflector. The hole of the lamp connector can just fit 2 adsorption magnets. Because the hole position of the led light bar cannot completely correspond to the hole position of the reflector, so the clamp at the other end needs to be reserved at this time.

5. Next, you can try to install the led light bar first to check whether the length of the led light bar is suitable. If the length of the led strip is just right, it can be installed directly, and then the reflector can be installed back. After installing the led light bar, you also need to plug in the driver board of the led light.

6. The next step is to turn off the air switch and start the electrical connection. First of all, you need to find the wiring instructions for the bathroom light and the all-in-one heater, then find the live wire and the neutral wire respectively, and then connect the live wire and the neutral wire to the two wires of the driver board.

7. Since there are screws on the connection terminals, it is necessary to loosen the screws a little, and then connect the live wire and the neutral wire in parallel with the connection wires of the driver board, then reinsert them, and tighten them again. In general, the original wires are very short, so the wiring should be properly extended according to the actual situation of the wires.

8. When all the lines are installed, a power-on test should be carried out first, and then the lampshade should be covered. After the lampshade is covered, the power-on test should be performed again. When it is confirmed that the lamp can be powered on normally, it means that the replacement is successful.

Why choose us?

• We have years of experience in the industry, making us experts in our field.
• The company has always adhered to the product positioning of excellent service, high quality and long life cycle, and has won praise from new and old customers.
• Our products are suitable for both commercial and residential use.
• Our employees can not only create enterprise value, but also improve their own value. They can work happily every day.
• We take every step to ensure our products are safe and reliable.
• Our company's business is currently involved in a variety of industries, with footprints in many cities and regions, and is praised by customers as a professional production company proficient in technology and marketing. Our Bathroom Heater Light has been exported to many countries. Wherever it is, our services arrive smoothly.
• Our products are designed to provide maximum comfort and convenience.
• We will keep abreast of the new development trends in the market, invest scientific research resources, expand new service areas, and explore the diversified direction of market development.
• We offer custom designs to meet your unique needs.
• We have established a professional quality control team, which has laid a solid foundation for the steady development of the company.