What Material Are LED Lights Made Of?

Jul 04, 2022

Leave a message

1. Chips


The composition of the wafer: it is composed of gold pad, P pole, N pole, PN junction, and back gold layer (dual pad wafer has no back gold layer). The wafer is a PN combination composed of P-layer semiconductor elements and N-layer semiconductor elements rearranged and combined by electron movement. It is this change that enables the wafer to be in a relatively stable state.


When a certain voltage is applied to the forward electrode of the wafer, the holes in the positive P region will continuously swim to the N region, and the electrons in the N region will move to the P region relative to the holes. When the electrons and holes move relative to each other, the electrons and holes pair with each other to excite photons and generate light energy.


Main classification, surface-emitting type: Most of the light is emitted from the surface of the wafer. Five-sided luminous type: There are more light emitting from the surface and sides according to the luminous color, red, orange, yellow, yellow-green, pure green, standard green, blue-green, blue.


Second, the bracket


The structure of the bracket is 1 layer of iron, 2 layers of copper plating (good conductivity, fast heat dissipation), 3 layers of nickel plating (anti-oxidation), 4 layers of silver plating (good reflection, easy to wire)


3. Silver glue (because there are many types, we take H20E as an example)


Also known as white glue, milky white, conductive adhesion (baking temperature: 100°C/1.5H) silver powder (conductivity, heat dissipation, fixed wafer) + epoxy resin (cured silver powder) + thinner (easy to stir).


4. Gold wire (take φ1.0mil as an example)


The gold wires used in LEDs are φ1.0mil, φ1.2mil, and the material of the gold wire. The material of the gold wire used for LEDs generally contains 99.9% gold.


Using the characteristics of high gold content, soft material, easy deformation, good electrical conductivity and good heat dissipation, a closed circuit is formed between the chip and the support.


5. Epoxy resin (take EP400 as an example)


Composition: A and B two groups of doses.


A glue: It is the main agent, which consists of epoxy resin + defoamer + heat-resistant agent + thinner.


Agent B: It is a curing agent, consisting of acid intoxication + mold release agent + accelerator.


Send Inquiry
Send Inquiry