Although the LED headlights are bright, upgrading the LED headlights by yourself will not only affect driving safety, but also increase the risk of spontaneous combustion. It is the best choice to choose the same type of lamp beads for upgrading.
LED headlights have many benefits, but there are limitations
LED lamps are brighter than halogen lamps
Replacement of halogen headlights with LEDs is to obtain higher brightness. There is a data on HELLA's official website. When the power is close, the brightness of LED headlights is 2~3 times that of halogen headlights.
However, although LED headlights have high brightness, they also have disadvantages.
For example, in rainy or foggy weather with low visibility, the penetrability of LED headlights is not as good as that of halogen lamps. This is caused by "Rayleigh scattering" and "Mie-Debye scattering principles" .
You don’t need to worry about its specifics. In simple terms, it is rainy and foggy weather. Large suspended particles in the air will have a blocking effect on visible light. The longer the wavelength and the higher the color temperature of the light, the worse the penetration effect will be.
To put it simply, the whiter the light looks, the less it penetrates, and the more yellow it looks, the better it penetrates.
But the penetration of LED lamps is worse than that of halogen lamps
The color temperature of halogen lamps is usually 3000 Kelvin, which is 3000K in local dialect, and it appears yellow. The color temperature of LED lights is generally 5500 Kelvin, which looks white.
Therefore, in rainy and foggy weather, the penetration of LED lights is indeed a little worse than that of halogen lights.
Halogen lamps are like 8 lanes, LED is like 2 lanes, but the speed is very fast, the mountain suddenly collapsed, blocking 2 lanes, and 6 lanes of halogen lights are still open, LEDs are completely wiped out and cannot be driven.
Many cars with standard halogen lamps will be equipped with special fog lamps to take advantage of the penetrating characteristics of halogen lamps.
For example, for the low-end Fit and the like, when it replaces the halogen lamp with an LED, the two configurations of the fog lamp are missing in rainy and foggy days, and it becomes "blind", which is not cost-effective.
Although the temperature of the LED lamp is not too high, the heat is concentrated
The hot spots of LED headlights are more concentrated, which can easily lead to aging of plastic parts and increase the risk of spontaneous combustion.
It is introduced in "Research on Heat Dissipation and Luminous Decay of LED Automotive Headlights" that although the average temperature of halogen lamps is higher than that of LED lamps, the heating parts are uniform, and the heat is mainly concentrated on the glass structure of the lamp beads. The temperature of the base is relatively low.
However, the photoelectric conversion efficiency of LED lamps is not very high, and 60% to 90% of electric energy will be converted into heat energy, which is concentrated near the LED chip.
After the heat is exported by the heat sink, it will accumulate near the base of the headlight assembly. For high-power LED headlights, the temperature at the base can even reach 200~300°C.
It's like a halogen lamp is used to hold hot water in a thermos. The hot water is very hot, right? But it is separated by the air insulation layer, and the thermos won't be hot when you hold it in your hand.
The LED light means that you take an iron pot and put hot water in it. Not only is the hot water scalding, but the iron pot itself will be scalded if you pinch it.
This characteristic of LED lights will cause rapid aging of circuits and plastic parts near the base.
The original factory has a heat dissipation design, but the modified LED has the risk of spontaneous combustion
In order to solve this problem, the original factory will have a special heat dissipation design. The fins of this kind of radiator are generally made of pure copper to improve heat dissipation efficiency, and some even use "active fan heat dissipation", which are all prepared in advance.
However, the modified LED is mainly made of aluminum to dissipate heat, and the cost is lower.
According to the paper "Research on Heat Dissipation Structure of High Power LED Lighting Lamps and Automotive Headlights", the greater the thermal conductivity of LED lamp heat dissipation materials, the better the heat dissipation effect, the lower the corresponding chip temperature, and the less prone to spontaneous combustion.
The thermal conductivity of aluminum is only about half of that of copper, so the heat dissipation performance of modified LED lights is a problem, and poor-quality LEDs may even leave a hidden danger of spontaneous combustion. You really have to change it yourself and use copper for heat dissipation.
It is not difficult to modify LED lights, and may not pass the annual inspection
Self-upgraded LED headlights may also be difficult to meet the national light distribution standards, which will affect the annual inspection of vehicles.
The national standard "GB 25991-2010 LED headlights for automobiles" requires that the low beam of LED headlights should have sufficient illumination, but should not be dazzling, and the high beam should have good illumination. The light distribution performance is within the specified value according to various illuminance test points and irradiated areas.
Anyway, in human terms, there are regulations on how far LED headlights can illuminate, how wide they can illuminate, what area should be illuminated, how much it should be illuminated in an area, and the angle of illumination. These things are all regulated and must meet the standards.
The original factory is a car with LED headlights, which must have been considered during the design and adjusted for you. When upgrading by yourself, it is usually installed and screwed on, and it is almost impossible to adjust it so accurately.
This is like a pastry recipe that says you want 15 grams of sugar, and a machine makes a cake, then 15 grams, very accurate, right?
When you make it by hand, you have to weigh it. It is troublesome to weigh it later. Mao estimates three spoonfuls or two and a half spoonfuls.
Changing the headlights without permission will make the parameters of the headlights inaccurate. It is okay for some cities to pass the annual inspection if they are not strict, but some cities are very strict, such as Shenzhen, and may not pass the annual inspection.
Retrofit LED lights are not covered by insurance
In addition, the insurance does not pay for the replacement of LED lights. It is described in the "Auto Damage Insurance Insurance Clause": "The insurer is not responsible for the loss of new equipment other than the standard configuration of the insured vehicle."
To put it simply, the installed LED lights are not covered by insurance claims. When an accident occurs while driving, the insurance company will use either LED or halogen lights. It depends on what is written on your original standard configuration. Don’t buy insurance. , you LED it to pay you a halogen lamp, it will become like this, and it is not convenient.
If you want to change the LED, you will also pay for the LED in the future, and you need to add an additional equipment insurance, which is another sum of money.
How to upgrade the headlights is the most effective
It is recommended to upgrade the original lamp beads of the same type
Therefore, if you have to upgrade the original car lights, I still recommend upgrading the same type of original lamp beads, which is more in line with the design logic of the original headlight assembly.
For example, if you think the halogen headlights are not bright enough, you can choose a halogen lamp with the same power but brighter.
At present, advanced halogen lamps are quite powerful. There will be a "laser ablation" technology to precisely control the size of the light-emitting window and enhance the brightness of the lamp beads. The brightness of this halogen lamp can reach 1.5 times to 2 times that of ordinary halogen lamps. , is really enough.
You still dislike the fact that the halogen lamps are too yellow and unsightly. As long as the original car has fog lamps, you can also choose to replace them with white halogen lamps.
Now there are white halogen lamps, which are also in line with the original design logic of the car, and are safer to use, but remember to turn on the fog lamps on rainy days. White halogen lamps cannot replace fog lamps.
There are thousands of roads, and safety comes first.
