The greater the output power of the PTC heater, the faster the heating speed. PTC electric heater motor: electric heating (PTC electric heater, electric heating furnace, etc.). The magnitude of the applied current is directly related to power, voltage, differential, and power factor (also called power). RF coaxial continuous use has the advantages of radiation-free safety and good vibration resistance. The reason why PTC heaters save energy is that their output power will decrease significantly as the ambient temperature increases. When the air volume remains constant, the power of the PTC heater will decrease to a certain extent, which to a certain extent has the benefit of automatically adjusting the power. On the other hand, the lower the room temperature. There is no resistance and power consumption. When the circuit is abnormal, the current is too large or the circuit is short-circuited, the power supply can be quickly cut off to protect the circuit and other components.
The reliability, service life and explosion-proof performance of electrical equipment of electric heater-type products, as well as the additional requirements for the door-type cable conduction device of the electric heater installed in the control box, should be matched with the leakage protection device. Lubricating system The lubricating oil system consists of a lubricating oil tank, main oil pump, auxiliary oil pump, oil cooler, oil filter, high oil tank, valves, pipelines, etc. The high-temperature electric fan lubricating oil tank is a device for supplying, acquiring, settling and accumulating lubricating oil. There is a heater inside to heat up before starting to ensure that the lubricating oil temperature rises to 35~45°C during startup to meet the needs of the unit's startup operation.
NC is a bayonet type and is mostly used for radio frequency continuity below 4GHz. Liquid explosion-proof electric heater explosion-proof electric heater auxiliary electric heater features: small size, high power: the heater mainly uses cluster tube electric heating elements. Fast temperature response, high temperature control accuracy, and high overall thermal efficiency. High-temperature heating: The water heater is designed to have a maximum operating temperature of up to 850°C.
Characteristics and main parameters of safety tubes of PTC heater manufacturers. The rated current refers to the maximum working voltage that the safety tube can withstand after it breaks. The working voltage experienced by both sides of the fuse is much lower than its rated current during connection. There are many types of fuses. Common fuse bonds can be divided into three categories: glass tube fuses with low discriminating ability, ceramic tube fuses with high discriminating ability, and polymer material self-restoring fuses made of PPTC plastic polymer. The electric heater does not require temperature feedback from humidity sensors such as professional thermostats and platinum thermal resistors. Its temperature adjustment depends on its own raw material characteristics, so the product is much higher than other products. When using a safety tube, it is generally specified that the rated current should exceed the reasonable working voltage of the power circuit. Rated voltage The rated voltage is the large amount of current generated by the safety tube during long-term operation. Assuming that the connecting current is Ir, the rated voltage of the fuse tube should be the reduction rate of the different standard fuse tubes. The higher the working temperature, the hotter the fuse tube will be when working, and the shorter its service life will be. The key point here is that the gas temperature around the safety pipe should not be confused with room temperature. PTC ceramic heater saves costs and has a long service life.
